This bulletproof and stab-resistant vest can be used for three purposes:
◎ Can be used as a stab-resistant vest
◎ Can be used as a bulletproof vest
◎ Can be used simultaneously as a bulletproof and stab-resistant vest
This is a bulletproof and stab-resistant vest that combines Class 3A bulletproof protection (resistance to handgun attacks) and Class 1 stab protection (compliant with NIJ-STD-0115.00 standards).
The bulletproof plate and stab-resistant plate are installed separately inside the vest, allowing for different applications depending on the environment.
● When the stab-resistant plate and shock absorber are installed simultaneously, the vest becomes a stab-resistant vest.
● When only the bulletproof plate is installed, the vest becomes a bulletproof vest.
● When both the stab-resistant plate and bulletproof plate are installed simultaneously, the vest becomes bulletproof.
During normal use, the stab-resistant plate is installed on the outside of the vest (the impact-bearing surface).
Therefore, it not only protects you from attacks by knives and other sharp objects but also prevents damage to the bulletproof plate.
Some might worry that if the stab-resistant plate and the ballistic plate are installed backwards, the stainless steel used in the stab-resistant plate could affect the impact absorption performance of the ballistic plate. However, testing has proven that this is not the case at all.
Normally, if a stainless steel plate that is too strong to bend by hand is used, the ballistic plate may fail to absorb impact force because there is insufficient expansion space upon impact, leading to penetration. However, the ballistic plate we use is only 0.2 mm thick, so it can be easily bent by hand. Thus, the impact energy is absorbed, and the performance of the ballistic plate is not affected.
To verify this, we conducted a ballistic plate stacking test.
The results showed that in the V50 (extreme test) using high-penetration Tokarev bullets, we achieved an astonishing test result of up to 1809 feet per second (551.3 meters per second).
Under normal use, the ballistic plate will be on the impact surface.
Upon impact, the bullet tip will be crushed, reducing its penetrating power, thus potentially achieving even higher ballistic protection performance.
We use Kevlar XD-S001 material directly imported from DuPont to create the world’s strongest and most reliable bulletproof vest.
This bulletproof test was conducted by HPWhite using 0101.06 3A material.
Compared to 0101.04 3A material, this material requires more layers to pass the test.
Furthermore, this material achieved a ballistic performance standard of 500 meters per second in the V50 Tokarev ballistic test.
The Tokarev ballistic test used 27 layers of material, while the actual protective panel has 28 layers, therefore its V50BL(P) value undoubtedly reaches 1654 feet per second (504 meters per second) or higher.
The product’s expected lifespan is approximately 5 years.
This vest is available in black and white, both made of lightweight mesh fabric.
It can be worn as an inner layer or over a shirt.
If you prefer to wear it with a suit, we recommend the one-shoulder vest.
The inner (bulletproof) panels of these vests are made of the same specifications and are available in two styles: black and white.