All Products – MOTEDO

Alarm UFO Alarm

admin — Fri, 03 Jul 2026 13:26:25 +0000

Model: UFO Alarm

【Function Introduction】

1. Self-Defense Function: In an emergency, pressing the emergency button will activate a powerful alarm, effectively deterring harassment and threats from criminals.

【Operating Steps】

■ Emergency Button Insulated Pin for Self-Defense

■ Press the emergency button; the alarm will activate immediately.

■ Pull out the insulated pin; the alarm and flashing light will activate immediately.

2. Anti-Robbery Function: If your purse is stolen, the alarm hanging on the purse will activate immediately,

defusing the crisis and preventing financial loss.

【Operating Steps】

■ Wrap the loop around your wrist.

■ Hang the key ring on the purse’s lanyard.

■ The alarm and flashing light will activate immediately upon robbery.

3. Internal Security: Door/window security can be easily operated from inside the house, ensuring peace of mind when living alone away from home.

【Operating Steps】

■ Hang the door handle cord on the door handle.

■ Insert the closed V-shaped spring into the door gap to complete the anti-theft setting.

■ When the door is opened, the alarm sound and flashing light will activate immediately.

4. Window Anti-theft Door/window anti-theft can be easily operated from inside, ensuring peace of mind when staying away alone.

【Operating Steps】

■ Hang the door handle cord on the hook by the window.

■ Insert the closed V-shaped spring into the window gap to complete the anti-theft setting.

■ When the window is opened, the alarm sound and flashing light will activate immediately.

5. Outdoor Anti-theft A patented, innovative anti-theft setting operated from the outside, providing greater peace of mind when away from home.

【Operating Steps】

■ Hang the door handle cord on the door handle, and insert the flexible sleeve into the closed V-shaped spring.

■ The user stands outside the door, holding the other end of the flexible sleeve,and presses the plastic base against the door frame inside.

■ Close the door; the V-shaped spring, along with the flexible sleeve, will be clamped in the door gap.

■ The user can pull out the flexible sleeve from the outside, completing the anti-theft setting.

■ When the door is opened, the alarm sound and flashing light will immediately activate.

6. Drawer Anti-theft The drawer anti-theft function provides more effective privacy protection. 【Operating Steps】

■ Place the alarm at the front of the drawer,

and insert the flexible sleeve into the closed V-shaped spring.

■ The user holds the other end of the flexible sleeve and closes the drawer; the V-shaped spring, along with the flexible sleeve, will be clamped in the drawer gap.

■ The user can pull out the flexible sleeve, completing the anti-theft setting.

【Anti-theft Features】

A. Patented, innovative anti-theft setting operated from the outside, providing greater peace of mind when away from home. B. When the metal V-shaped spring of the anti-theft component opens, the alarm sound and warning light will immediately activate; when the metal V-shaped spring is closed with two fingers, the alarm sound and warning light will immediately stop. C. On the anti-theft pin, select the alarm mode setting: Immediate Alarm Mode: (Switch to the right side, INSTANT)

—When a door/window/drawer is opened, the alarm sound and warning light will immediately activate. Delayed Alarm Mode: (Switch to the left side, DELAY)

—When a door/window/drawer is opened, the alarm delay function will proceed as follows (80 seconds in total)

Baton ABS

admin — Fri, 17 Jul 2026 06:27:00 +0000

ABS resin is characterized by excellent rigidity. In addition to impact resistance, bending fatigue, tensile strength and other strengths, it also gives full play to the overwhelming lightweight rod.

Compared with the metal baton, the energy when hitting is small, but even so, being hit by the baton will bring considerable pain.

Unlike metal rods, there are very few serious injuries that can cause fractures with one blow.

The ABS baton is easy to swing, but it will be easily restored after stabbing and other operations, so it is just a tool for knocking.

Material: ABS

Length when stretched: 515±5mm

Length when shrinking: 200±5mm

Handle diameter: 28mm±2mm

Middle shaft diameter: 18mm±2mm

End shaft diameter: 11mm±2mm

Weight: 190±10g

Baton KL-26SPG

admin — Fri, 17 Jul 2026 06:23:47 +0000

●Model: KL-26SPG

● Model: KL26SPG Sponge Grip

● Steel of the command baton: end tube (4140 steel), middle tube (4140 steel), handle Alloy 45 (high chromium austenitic nickel chromium iron alloy)

● Length when reduced: 235mm±5mm

● Length when stretched: 630mm±5mm

● Handle diameter: 26mm±1mm, 45# alloy steel and sponge grip

● Intermediate pipe diameter: 16mm±1mm, 42CrMo alloy steel

● End tube diameter: 11mm±1mm, 42CrMo alloy steel

● Weight: 511g±10g

●Hardness: 45-50HRC

●Tube color: titanium black

●Attachment: Leather case

●Manufacturing: Made in China

Bulletproof Vest-Black

admin — Fri, 17 Jul 2026 05:13:17 +0000

This bulletproof and stab-resistant vest can be used for three purposes:

◎ Can be used as a stab-resistant vest

◎ Can be used as a bulletproof vest

◎ Can be used as both a bulletproof and stab-resistant vest

This is a bulletproof and stab-resistant vest, combining Class 3A bulletproof protection (resistance to handgun attacks) and Class 1 stab protection (compliant with NIJ-STD-0115.00 standards).

The bulletproof plate and stab plate are installed separately inside the vest, allowing for use in various environments.

● When both the stab plate and shock absorber are installed, the vest becomes a stab-resistant vest.

● When only the bulletproof plate is installed, the vest becomes a bulletproof vest.

● When both the stab plate and bulletproof plate are installed, the vest becomes bulletproof.

During normal use, the stab plate is installed on the outside of the vest (the impact-bearing surface).

Therefore, it not only protects you from attacks by knives and other sharp objects but also prevents damage to the bulletproof plate.

Some may worry that if the stab plate and bulletproof plate are installed incorrectly, the stainless steel material used in the stab plate might affect the impact absorption performance of the bulletproof plate. However, testing has proven that this will not occur.

Normally, if a high-strength stainless steel plate that cannot be bent by hand is used, a bulletproof vest may fail to absorb impact because there is insufficient expansion space upon impact, leading to penetration. However, the bulletproof vest we use is only 0.2 mm thick, so it can be easily bent by hand. This allows impact energy to be absorbed without affecting the vest’s performance.

To verify this, we conducted a bulletproof vest stacking test.

The results showed an astonishing test result of 1809 feet per second (551.3 meters per second) in the V50 (extreme test) using high-penetration Tokarev bullets.

Under normal use, the bulletproof vest will be on the impact surface.

Upon impact, the bullet tip will be crushed, reducing its penetrating power, thus potentially achieving even higher ballistic performance.

We used Kevlar XD-S001 material directly imported from DuPont to create the world’s strongest and most reliable bulletproof vest.

This bulletproof test was conducted by HPWhite using 0101.06 3A material.

Compared to the 0101.04 type 3A material, this material requires more layers to pass testing.

Furthermore, this material achieved a ballistic protection performance standard of 500 meters per second in the V50 Tokarev ballistic test.

The Tokarev ballistic test used 27 layers of material, while the actual protective panels have 28 layers, therefore its V50BL(P) value undoubtedly reaches 1654 feet per second (504 meters per second) or higher.

The product’s expected lifespan is approximately 5 years.

This garment is available in black and white, both made of lightweight mesh fabric.

It can be worn as an inner layer or over a shirt.

If you prefer to wear it with a suit, we recommend the one-shoulder vest.

These vests use the same specifications for their inner (ballistic) panels and are available in both styles: black and white.

Bulletproof Vest-White

admin — Fri, 03 Jul 2026 13:36:30 +0000

This bulletproof and stab-resistant vest can be used for three purposes:

◎ Can be used as a stab-resistant vest

◎ Can be used as a bulletproof vest

◎ Can be used simultaneously as a bulletproof and stab-resistant vest

This is a bulletproof and stab-resistant vest that combines Class 3A bulletproof protection (resistance to handgun attacks) and Class 1 stab protection (compliant with NIJ-STD-0115.00 standards).

The bulletproof plate and stab-resistant plate are installed separately inside the vest, allowing for different applications depending on the environment.

● When the stab-resistant plate and shock absorber are installed simultaneously, the vest becomes a stab-resistant vest.

● When only the bulletproof plate is installed, the vest becomes a bulletproof vest.

● When both the stab-resistant plate and bulletproof plate are installed simultaneously, the vest becomes bulletproof.

During normal use, the stab-resistant plate is installed on the outside of the vest (the impact-bearing surface).

Therefore, it not only protects you from attacks by knives and other sharp objects but also prevents damage to the bulletproof plate.

Some might worry that if the stab-resistant plate and the ballistic plate are installed backwards, the stainless steel used in the stab-resistant plate could affect the impact absorption performance of the ballistic plate. However, testing has proven that this is not the case at all.

Normally, if a stainless steel plate that is too strong to bend by hand is used, the ballistic plate may fail to absorb impact force because there is insufficient expansion space upon impact, leading to penetration. However, the ballistic plate we use is only 0.2 mm thick, so it can be easily bent by hand. Thus, the impact energy is absorbed, and the performance of the ballistic plate is not affected.

To verify this, we conducted a ballistic plate stacking test.

The results showed that in the V50 (extreme test) using high-penetration Tokarev bullets, we achieved an astonishing test result of up to 1809 feet per second (551.3 meters per second).

Under normal use, the ballistic plate will be on the impact surface.

Upon impact, the bullet tip will be crushed, reducing its penetrating power, thus potentially achieving even higher ballistic protection performance.

We use Kevlar XD-S001 material directly imported from DuPont to create the world’s strongest and most reliable bulletproof vest.

This bulletproof test was conducted by HPWhite using 0101.06 3A material.

Compared to 0101.04 3A material, this material requires more layers to pass the test.

Furthermore, this material achieved a ballistic performance standard of 500 meters per second in the V50 Tokarev ballistic test.

The Tokarev ballistic test used 27 layers of material, while the actual protective panel has 28 layers, therefore its V50BL(P) value undoubtedly reaches 1654 feet per second (504 meters per second) or higher.

The product’s expected lifespan is approximately 5 years.

This vest is available in black and white, both made of lightweight mesh fabric.

It can be worn as an inner layer or over a shirt.

If you prefer to wear it with a suit, we recommend the one-shoulder vest.

The inner (bulletproof) panels of these vests are made of the same specifications and are available in two styles: black and white.

Handcuffs JC-103A

admin — Fri, 03 Jul 2026 13:29:08 +0000

Model: JC-103A

This handcuff features a double locking mechanism to prevent pinching injuries and comes with two keys.

The JC series handcuffs are made in Taiwan, but the manufacturer is a well-known company and the fourth largest mass-producer of handcuffs globally.

Recommended for theatrical and magic performances.

Unlike the JC-103B/JC103C, this handcuff does not have an automatic release knob; therefore, it requires a key to open.

Model: JC-103A

Length: 270 mm

Weight: Approx. 209 g

Material: Zinc alloy/iron

Surface Treatment: Silver chrome plating

Locking System: Double locking

Chain: Length 5.8 cm / Diameter 3.5 mm

Minimum Unlocking Diameter: 5.5 cm

Minimum Inner Circumference: 13.5 cm

Maximum Inner Circumference: 19.5 cm

Locking Positions: 9

Handcuffs JC-103B

admin — Fri, 03 Jul 2026 13:31:16 +0000

Model: JC-103B

Even with the double-locking function activated, the handcuffs can be easily unlocked by simply pressing the release knob.

The release knob for the JC-103B is located next to the chain connection point, while the release knob for the JC-103C is located on the side.

These quick-release handcuffs are ideal for theatrical and magic performances.

The double-locking function prevents pinching and is standard equipment, and two keys are included.

These handcuffs are robust and durable, featuring a single-chain design.

The JC series handcuffs are made in Taiwan, but the manufacturer is the world’s fourth-largest handcuff producer.

Model: JC-103B

Length: 270 mm

Weight: Approx. 210 g

Material: Zinc alloy/iron

Surface Treatment: Silver chrome plating

Locking System: Double locking

Chain: Length 5.8 cm / Diameter 3.5 mm

Minimum Unlocking Diameter: 5.5 cm

Minimum Inner Circumference: 13.5 cm

Maximum Inner Circumference: 19.5 cm

Locking Positions: 9

Peacekeeper Baton

admin — Fri, 17 Jul 2026 06:47:38 +0000

The PEACEKEEPER baton is a US-made expandable baton.

It has set a remarkable record for bending strength at 2,206.46 kgf.
This US-made model is a top choice among customers inquiring about bending strength. Test results showed a strength of 2,206.46 kgf—a figure second only to the BONOWI baton. While this value represents an average across several tested units, the peak figure reached 2,382 kgf. Unlike ASP batons (made of 4140 steel), which tend to fracture or shatter under extreme stress, this baton—constructed from 4130 steel—exhibits ductility, bending slightly into a curve rather than breaking.
Its appearance resembles a standard baton. However, it features a unique forward-weighted design engineered to maximize destructive impact power. The striking force generated by this baton is exceptionally powerful—unmatched by other police batons. Consequently, the manufacturer intends for strikes to be directed solely at muscle groups. Striking the head or face with such immense force could prove fatal; therefore, please ensure it is used only against muscular areas of the body.
Length: Max: approx. 620mm / Min: approx. 245mm
Color: Black / Zinc
Weight: approx. 695g
Grip: Rubber grip

Stun Gun TITAN JM-miniR

admin — Fri, 03 Jul 2026 13:33:08 +0000

Model: TITAN JM-miniR Stun Gun

The TITAN JM-miniR emphasizes “lightweight and portable × high-efficiency protection,” designed specifically for everyday personal safety. Despite its compact size, it boasts a powerful electric shock output, making it a reliable safety tool for commuting, nighttime outings, and outdoor activities.

【Product Features】

❶ High-voltage instantaneous shock design

Utilizing the principle of high voltage and low current, it instantly generates a strong electric shock effect, effectively deterring and stopping targets, enhancing self-protection capabilities.

❷ LED lighting function (multi-functional integration)

Built-in high-brightness LED light, usable as a flashlight, combining nighttime illumination and emergency response in one device.

❸ Lightweight and mini design, easy to carry

Mini-sized design, easily fits in a pocket or bag, making it burden-free to carry.

❹ Safety switch design

Equipped with an anti-accidental activation safety switch to prevent accidental activation, ensuring safer use.

❺ Rechargeable design (depending on version)

Convenient charging, eliminating the hassle of frequent battery replacements.

【Product Specifications】

* Model: JM-miniR

* Type: Handheld stun gun

* Function: Electric shock / Lighting

* Material: High-strength ABS shell (impact-resistant design)

* Target audience: General adult self-defense use

【Suitable Scenarios】

* Nighttime commute / Going home from get off work

* Solo travel / Outdoor Activities

* Emergency Self-Defense and Safety Precautions

【Usage Reminders】

* Please use in accordance with local laws and regulations

* For legitimate self-defense purposes only

* Keep out of reach of children

Stun Gun TITAN-650KV Titan-G300

admin — Fri, 03 Jul 2026 13:35:19 +0000

Model: TITAN-650KV Titan-G300 High-Voltage Stun Gun

【Product Features】

The TITAN-G300 high-voltage stun gun is a professional-grade protective device, combining powerful shock output with a robust chassis design to provide reliable safety. Its simple design and intuitive operation make it suitable for use by professionals who require legal possession.

【High-Voltage Electric Shock Protection】

* High-voltage pulse design

* Rated output: Approximately 200KV high-voltage electric shock

* Instantly produces a strong deterrent effect

【Stable Power Supply Design】

* Uses 3 x 9V alkaline batteries

* Easy replacement, stable power supply

* No need to wait for charging, always ready to use

【Rugged and Durable Casing】

* High-strength engineering plastic casing

* Insulated design enhances safety

* Non-slip grip for stable handling

【Educational Operation】

* Side-mounted start button

* Quick response, operable with one hand

* Includes a wrist strap to prevent dropping

【Product Specifications】

Model: Titan-G300

Voltage Rating: Approximately 200KV

Power Supply: 3 × 9V alkaline batteries

Dimensions: 200 × 57 × 32 mm

Weight: Approximately 220g

【Suitable Users】

* Legally owned security/law enforcement personnel

* Professional protection applications

* Users with specific security needs